Exporter

Manufacturer

Wholesaler

Retailer

SILKCOAT DUVAR KAPLAMALARI LTD. ŞTİ.

Product Description: Asthma and Allergy friendly, very low VOC paint.
Colored using pure and inorganic pigments in accordance with the Danish Association of Asthma-Allergy label.

Astimat Paint

Product Description: Acrylic copolymer binder based, silk-mat appearance, water-based, first-class, satin interior topcoat paint.

Features: Natural satin with a satin and silk-mat appearance has a high covering ability. In addition to being cleanable, its colors retain its vitality for many years. Due to its water-based structure, it does not harm human health or the environment.

Application surfaces: Can be applied to all pre-painted interior surfaces such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.

Technical Data:

Structure: Styrene Acrylic

Consumption: Single coat: 13-18 (m² / lt), 80-115 (g / m2)

Thinner: Water

Thinning Ratio: 10-15%

Drying Time: Touch 15 – 20 min; Dust retention 1 hour; Full drying 24 hours

Viscosity: 125 KU ± 10 (23 º C)

PH (25 ° C): 8 – 9

Density: 1,25 ± 0,02 (g / ml)

Solid Matter: 53 ± 2%

Wet Scrub Resistance: Class 1 (TS EN 13300)

Covering force: Class 2 (8m2 / lt) (TS EN 13300)

Grain size: Class S1 (TS EN 13300)

Brightness: Class G2 (TS EN 13300)

Dry Film Thickness: (30 ± 5) microns

Wet Film Thickness: (60 ± 5) micron

Application: The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty. Silkcoat Universal Primer should be used on new painted and absorbent surfaces, Silkcoat Paste Primer should be used on surfaces that are old painted, dirty or synthetic painted surfaces and putty applied surfaces. Silkcoat Natural Satin is applied in 2 coats by roller, brush or spray method after being thinned with 10-15% of clean water. Wait at least 2 hours between coats depending on the air temperature. Application tools should be cleaned with water after application. For new coated surfaces, at least 28 days must be waited for the application of paint to the surface. The paint should be mixed until it is completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

Warning:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

Storage: In a cool, clean and dry environment, the product can be stored for a minimum of 1 year without opening the door of the cabinet, without exposure to direct sunlight.

Package: 15 lt, 7,5 lt, 2,5 lt PE bucket.

interior topcoat pain

DESCRIPTION: Acrylic copolymer binder-based, matt outward looks, water based, fisrt class ceiling primer paint.

CHARACTERISTIC:  -Healthy and environmental friendly -High covering ability. –Breathable -Extra matt outward looking  -Easily appliable and leaves no remainings. –Leaves no rol lor brush after application.

APPLICATION SURFACES: After surface preparation, Lux Tavan can be applied on a wide range of interior surfaces such as old painted surfaces, concrete, plaster, rendering, cement board, wallpaper, glass textile etc.

TECHNICAL INFORMATION:

Content: Styrene Acrylic

Consumption: Single coat: 6- 10  (m²/ lt), 95-140 (gr/m²)

Thinner: Water

Thinning Ratio: %10-15

Drying: Touch Dry: after 15-20 min, Dust repulsive: after 1 hour, Hard dry: after 24 hours

Viscosity: 125 KU ± 10   (  23 º C )

pH: 8 – 9

Density: 1,62 ± 0,05 (gr / ml)

Solids Content: %67±2

Wet Rubbing Power: Class 5

Covering Power: Class 2 ( 8 m²/lt )

Grain Size: Class S1

Brilliance: Class G3 matt

Thickness of dry coat: ( 40 ± 5 ) micron

Thickness of wet coat: ( 90 ± 5 ) micron

SURFACE PREPARATION: – The surface must be cleared of any oil, dirt or dust. Swollen and old paintings must be scraped off. Surface must be clean, dry and solid. -Hollows and cracks should be filled with Silkcoat Dâhili Akrilik Macun in case of necessity. -On the surfaces which are absorbent or were not painted before should be obtained by applying Silkcoat Izolac. Old and synthetic painted or dirty surfaces should be obtained by applying Silkcoat Universal Astar, On the surfaces which has been puttied should be obtained by applying Silkcoat Macun Astari(Putty Primer).

 APPLICATION:-Silkcoat Lux should be thinned 10-15% with clean water and applied with roller, brush or spraying in two coats. -Leave minimum 2 hours between coats depending on weather conditions. -After application, tools should be cleaned with water.

APPLICATION DETAILS:-On new painted surfaces, make Sure that Surface has waited about 28 days before application. -Paint should be completely mixed so that it is homogenous. -Ambient and surface temperature should be between +5 and +35 degrees during the application and product drying season. -Gloss and glasslike Surfaces should be rubbed before application to obtain better adhesive and a healthy Surface.

CAUTION: – S2: Keep out of the reach of children. – S24/25: Avoid getting eye and skin contact. In case wash with plenty of water. – S46: If swallowed, seek medical advice immediately and show this container or label – Preserve in a tightly closed container. – Do not dump into the sewer system.

STORAGE: Keep  at a cool and clean place away from sun light. It can be stored unopened 1 year  at room temperature.

PACKAGING:25kg, 20kg, 17,5kg, 10kg,  3,5kg PE bucket.

Lux Ceiling Paint

Product Description: Acrylic copolymer binder based, matt interior paint.
 
Features:

Interior Primer, which is an interior wall paint that gives superior adhesion on new and old painted surfaces and can be easily applied without leaving traces, has high covering properties and water removal ability. Due to its water-based structure, there is no unpleasant odor, it can be inhaled.

 Application surfaces:

It can be applied to thin plaster, gross concrete, concrete plate, wood, gypsum plaster, gypsum plate and so on.

 Technical Data:

Structure: Styrene Acrylic

Consumption: 10-15 (m² / lt), 65-100 (g / m2)

Thinner: Water

Thinning Ratio: 15-30%

Drying: Touch: 1-2 hours, Full: 4-5 hours.

Density: 1,62 ± 0,05 (g / ml)

 Application:

A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. To obtain a smooth surface, gypsum or plastic paste is applied to the surface, then when it is dry it should be smooothed. Interior primer is diluted with 10-15% of water and applied as a single layer with brush or roller. For new coated surfaces, at least 28 days must be waited for the application of paint to the surface. The paint should be mixed until it is completely homogenous before use. The ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

Warning:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

 Storage:

At room temperature at least 1 year before opening.

Package:

20 kg, 3 kg PE bucket.

Interior Primer Paint

DESCRIPTION:  Pure Acrylic binder based matt appearance water based first class exterior paint.

CHARACTERISTIC: Silicone modified top coat with superior adhesion and water repellent power. Due to the silicone content, Silicone Paint does not swell or spill on the surface which makes the surfaces less wet and dry quickly. In addition to being resistant to the harmful effects of rain water, snow water and sun rays, it has high resistance to abrasive effect of sea water near the sea.

APPLICATION SURFACES: It can easily be applied on exterior facades of buildings, fine plaster, gypsum plate, gross concrete, concrete plate and similar building elements.

TECHNICAL INFORMATION:

Structure: Acrylic pur

Consumption: Single coat: 6- 10  (m²/lt), 100-170 (g/m2)

Thinner: Water

Thinning Ratio: % 10-15

Density: 1,57 ± 0,02 ( g / ml )

Drying: Touch dry: after 15-20 minutes, Dust repulsive : after 1 hour, Hard dry: after 24 hours

Viscosity: 115 KU ± 10   (  23 º C )

pH: 8 – 9

Brightness: Class G3 Mat (TS EN 1062-1)

Dry Film Thickness: Class E2 (TS EN 1062-1)

Grain size: Class S1 (TS EN 1062-1)

Water Water Transfer Rate: Class V1 (TS EN 1062-1)

Water Transfer Rate: Class W3 (TS EN 1062-1)

Cracked Covering Specification: Class A0 (TS EN 1062-1)

Carbon dioxide permeability: Class C0 (TS EN 1062-1)

Wet Film Thickness: (90 ± 5) micron

APPLICATION: The application surface should be free from all kinds of dust, rust, dirt, oil and old paint residues. The surface cracks should be smoothed with Silkcoat External Putty and sanded, then applied with Silkcoat Silicone Primer to obtain a clean, dry and solid surface. Silicone Paint is diluted with 10-15% clean water for the first coat and thinned with 5-10% water and applied in 2 coats by roller, brush or spray method. Wait at least 2 hours between coats depending on the air temperature. Tools should be cleaned immediately after application. For new coated surfaces, at least 28 days must be waited for the application of paint to the surface. The paint should be mixed until it is completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

CAUTION: -Avoid getting eye and skin contact. In case wash  with plenty of water. -Preserve in a tightly closed container. -Keep above the reach of children -Do not dump into sewer system.

STORAGE:  Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING: 15 lt, 7,5 lt, 2,5 lt PE Bucket

QUALITY CERTIFICATE: Found complying as per TS7847 conditions.

exterior paint

Product Description: Pure acrylic binder based, silk matt appearance, flexible exterior paint.

Features:                                                  

Hydroclean Plus paint is resistant to sunlight (UV), rain, snow and industrial effects. It has high covering and adhesion ability as well as can be easily applied. It does not crack due to its flexible structure.

Application surfaces:

can be applied to all pre-prepared, clean and dry exterior surfaces.

Technical Data:

Structure: Pure Acrylic

Consumption: Single Floor: 6- 10 (m² / lt)

Thinner: Water

Thinning Ratio: 40% max.

Drying Time: Touch 15 – 20 min; Dust Hold Time: 1 hour; Full Drying 24 hours

PH (25 ° C): 8 – 9

Application:

The application surface should be free from all kinds of dust, rust, dirt, oil and old paint residues. A clean and dry surface must be obtained. If any cracks exist on the surface, they should be smoothed with Silkcoat External Putty, then Silkcoat Silicone Primer should be applied. Hydroclean Plus is applied in 2 coats with roller or brush by thinning with maximum 40% of clean water. Wait at least 2 hours between coats depending on the air temperature. Tools should be cleaned immediately after application. For new coated surfaces, at least 28 days must be waited for the application of paint to the surface. The paint should be mixed until it is completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

Warning:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

Storage:

In a cool, clean and dry environment, the product can be stored for a minimum of 1 year without opening the door of the cabinet, without exposure to direct sunlight.

Package:

15 lt, PE bucket.

DESCRIPTION: Acrylic copolymer binder and granite marble-based, durable decorative exterior coating material.

CHARACTERISTIC:  -Natural lively colourfast (preserves its natural color life for many years) -Resistant against atmospheric conditions. -Resistant against water ,washing and rubbing. -Breathable due to its water-based structure, a flexible wall covering and no unpleasant sent.

APPLICATION SURFACES: Silkcoat Stone can be easily applied on a wide range of interior and exterior surfaces, concrete, brick, plaster, concrete finishes, wood and similar surfaces except metal and glass.

TECHNICAL INFORMATION:

Structure: Styrene Acrylic binder based thin / bold grained

Thinning Ratio: Thin / bold: Ready to use

Consumption: For thin: 2500-3500 (g / m2)

For bold: 4000-6000 (g / m2)

Density: For thin: 1,85 ± 0,2 (g / ml)

For bold: 1,80 ± 0,2 (g / ml)

APPLICATION: The application surface should be free from all kinds of dust, rust, dirt, oil and old paint residues. A clean, dry and solid surface should be obtained by scraping the swollen, loosened and poured painted surfaces and applying Silkcoat Acrylic Primer after the surface cracks have been leveled with Silkcoat External Putty and smoothing. Stone is poured into a large container. Depending on the ground and weather conditions, 1-1,5 lt of water is added and mixed. It is applied to the surface with the help of rectangular steel trowel. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying.

CAUTION: -Avoid getting eye and skin contact. In case wash  with plenty of water. -Preserve in a tightly closed container. -Keep above  the reach of children -Do not dump into sewer system.

STORAGE:  Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING: 25 Kg PE Bucket

decorative exterior coating material

Product Description: Acrylic copolymer cement based, antique stone decorative paint.

Features:

Travertino, which offers a stone appearence, presents the quality of an aged, modern and live stone wall, also allows for different pattern applications. Because it is water-based, it does not harm human health and environment.

 Application surfaces:

All pre-painted surfaces with floor preparation can be applied to interior surfaces such as concrete, plaster, black plaster, betopan.

Technical Data:

Structure: Styrene Acrylic

Consumption: 1-1,5 m2 / lt, 1500-2500 (g / m²)

Density: 1.95 ± 0.02 (g / ml)

Thinning ratio: Ready to use.

Drying Time: It takes 1 day to hard dry. If applied in 2 coats, the first coat dries in 24 hours.

 Application:

The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty. Travertino is mixed with 20-25% water until the first layer is flattened and mixed until it becomes homogenous. Travertino is applied to the entire surface with trowel. To make the surface smooth, the first coat is left to dry for 1 day after it has been smoothened with a trowel. Prior to the application of the second layer, the surface is soaked with a roll of water. When the dry surface is obtained, the second layer is again applied to the surface with a trowel. When the second coat surface is about to dry, the patterns are created with the help of the backside of the trowel. After enough lines have been formed, they are again smoothed with the trowel and left to dry for another day. On the third day, The final surface is again wetted with water by means of a roller. Without full drying, Silkcoat Arteco, which is the last layer, is diluted with 25-30% and applied with the help of a special tool. Travertino should be mixed until completely homogenous before use. Dilute Travertino as much as you can on each floor. Since the product is cement based, it can be dried. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

Warning:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

Storage:

In a cool, clean and dry environment, the product can be stored for a minimum of 1 year without opening the door of the cabinet, without exposure to direct sunlight.

Package:

25 kg, 15 kg PE bucket.

decorative paint

DESCRIPTION:Acrylic Copolymer binder based, grained exterior coating material.

CHARACTERISTIC:  -High covering ability and feature of covering surface defects. -Breathable and water-based. -Resistant against external weather conditions. -Twisted and striped patterned decorative exterior ready plaster.

APPLICATION SURFACES: Can be applied on all exterior and interior prepared surfaces such as concrete , concrete plate ,cement and similar.

TECHNICAL INFORMATION:

Structure: Styrene Acrylic

Consumption: 3000 – 3500 (g / m2)

Thinning ratio: Ready to use.

Density: 1,69 ± 0,2 (g / ml)

Suitable primer: Silkcoat Color Primer.

Application tools: Steel trowel (application), plastic trowel (pattern).

Drying: Touch 2-4 hours, hard dry 24 hours.

APPLICATION: The application surface should be free from all kinds of dust, rust, dirt, oil and old paint residues. Surfaces that are swollen, loosened and poured are scratched and the cracks on the surface are smoothed with Silkcoat External Putty. After the ground preparation is completed, Silkcoat Color Primer suitable for Silkoterasit is applied. After 1 day Silkoterasit can be applied.

CAUTION: -Avoid getting eye and skin contact. In case wash  with plenty of water. -Preserve in a tightly closed container. -Keep above  the reach of children -Do not dump into sewer system.

STORAGE:  Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING: 25 Kg PE Bucket

exterior coating material

DESCRIPTION: Acrylic Copolymer binder based, exterior putty.

CHARACTERISTIC:

-Resistant against outside conditions with its special structure.

-Cover plaster faults and easily appliable.

-Minimum consumption, breathing ability, dry in short time.

-Due to its streching ability, it covers the cracks and prevents them from reaching the finishing coat.

APPLICATION SURFACES:

Can be applied on surfaces such as conventional plaster ,concrete , asbestos plate ,gas concrete and similar.

TECHNICAL INFORMATION:

Structure : Stirene acrylic.

Consumption :500 – 1500 gr/m² depending on surface.

Thinning Ratio : No thinning, ready-to-use.

Application tools : Trowel , spatula.

Drying : After 1 – 4 hours depending on weather conditions.

Ph : 8 – 9

Density : 1,88 ± 0,05 ( g / ml )

Amount of solid : ( 73 ± 5 ) %

Thickness of dry coat: ( 350 ± 50 ) micron

Thickness of wet coat: ( 650 ± 50 )  micron

APPLICATION:

-It should be applied without diluting on old and new surfaces.

-For concrete surfaces, Acrylic Putty is mixed with 20% cement to form a smooth and solid surface.

– Ambient and surface temperature should be between + 5ºC and + 30ºC during the application and product drying.

CAUTION:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

STORAGE: Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING: 25 Kg  5 Kg PE Bucket

Acrylic Putty

DESCRIPTION: Acrylic copolymer emulsion based, water repellent primer.

CHARACTERISTIC:

prevents water permeability when applied before the topcoat on mineral based and very absorbent surfaces. Reduce consumption to minimum. It provides better adhesion of topcoat paints, prevents swelling and spills.

APPLICATION SURFACES:

Can be applied on surfaces such as fine plaster, gross concrete, asbestos sheets, eternite, gas concrete and similar.

TECHNICAL INFORMATION:

Structure: Stiren Acrylic

Consumption: Single coat: 12 –  14  (m²/lt), 100-130 (g/m2)

Thinning Ratio: % 15-20 with water

Recommended Primer: Silkcoat Acrylic Exterior Putty

Application tools: Roller or brush.

Drying: Touch dry: after 15 –  20 minutes; Dust repulsive; 1hour;  Hard dry; after 24 hours

Viscosity: 110 KU ±10   (  23 º C )

pH: 8- 9

Density: 1,52 ± 0,05 ( g / ml )

Amount of solid: ( 63 ± 2 ) %

Brilliance: at 85º  7 ± 3

Thickness of dry coat: ( 40 ± 5 ) micron

Thickness of wet coat: ( 80 ± 5 ) micron

APPLICATION:

The application surface should be free from all kinds of dust, dirt and oil. Surface defects and cracks are repaired with the suitable paste and smoothed to obtain a clean, dry and solid surface. It is diluted with 20-25% water and applied by roller or brush. Ambient and surface temperature should be between + 5ºC and + 30ºC during application and product drying and should not be applied during rainy weather.

CAUTION:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

STORAGE:

Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING:

15 lt – 2,5 lt PE bucket.

water repellent primer

DESCRIPTION: Acrylic Copolymer binder based, marble patterned decorative interior wall paint.

CHARACTERISTIC: -Harmless to people and environmental friendly through its water based content. -Suits your personal pleasure with its marble pattern, and velvety structure. -High covering ability. -Leaves no cracks. -Easy cleanable through glassy surface.

APPLICATION SURFACES:After surface preparation, Marmarito can be applied on a wide range of interior surfaces such as old painted surfaces, concrete, plaster, rendering, cement board, wallpaper, glass textile etc.

TECHNICAL INFORMATION

Structure: Styrene Acrylic

Consumption:  4,5- 5,5  (m²/ kg), 250-300 (g/m2)

Density: 1,57 ± 0,02 ( g / ml )

Solids Content: %65±2

Thinner: No thinning, ready to-use

Drying: Touch dry: after 30-45 min, Dust repulsive: after 1-1.5 hour, Hard dry: after 24 hours

SURFACE PREPARATION: – The surface must be cleared of any oil, dirt or dust. Swollen and old paintings must be scraped off. Surface must be clean, dry and solid. -In case that surface is not smooth, to be able to apply Marmarito on the surface first apply Silkcoat Dahili Akrilik Macun to obtain problem-free surface.  -A smooth and glazed surfaces should be obtained by applying Silkoat Izolac before Marmarito application. smooth but old painted, sytnthetic and dirty surfaces should be obtained by applying Silkcoat Universal Primer. A surface which has been puttied should be obtained by applying Silkcoat Putty Primer. Silkcoat Universal Primer should be used on smooth, old painted surfaces, Silkcoat Universal Primer, Silkcoat Putty Primer should be used on surfaces that are applied with putty.

APPLICATION: -Silkcoat Marmarito can be applied without diluting through spatula in two coats. -Leave minimum 4 hours between coats depending on weather conditions. -After 2. coat application is dry ,marmarito is applied with spatula without diluting  again giving  diagonal and vertical-horizontal non continous spatula or trowel strikes to make material textured on surface.  – As a last step , the entire surface is shined by putting pressure on the trowel with up-down and right-left  circular movements. Different colors can be obtained. –After application , tools should be cleaned with water.

APPLICATION DETAILS: Before using Marmarito, it should be mixed until it becomes completely homogenous. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by sanding the surface first to ensure better adhesion.

CAUTION:  -Avoid getting eye and skin contact. In case wash  with plenty of water. -Preserve in a tightly closed container. -Keep above  the reach of children -Do not dump into sewer system.

STORAGE: Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING: 12kg, 4kg PE Bucket.

decorative interior wall paint

Product Description: Pure Acrylic binder based, nacre additives, pearl-appearence, water-based, first-class, decorative, final coat interior coating.

Features: Silkcoat Pearl, with a pearl texture, lined or curvy interior coating, has a high covering ability. In addition to being cleanable, it is water based and does not harm human health and environment.

Application surfaces: Can be applied to all pre-painted interior surfaces such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.

Technical Data:

Structure: Pure Acrylic

Consumption: Single coat: 2- 3 (m² / kg)

Thinner: Water

Solid Matter: 69% ± 2

Thinning Ratio: Applied without thinning. If necessary, max. 10%

Drying Time: Touch, 25 – 30 min; Dust repulsive 1 hour; Full drying 24 hours

PH (25 ° C): 8 – 9

Application: The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty. Silkcoat Universal Primer should be used on new painted and absorbent surfaces, Silkcoat Paste Primer should be used on surfaces that are old painted, dirty or synthetic painted surfaces and putty applied surfaces. Silkcoat Pearl is applied on a single layer with glass trowel without being thinned. With the help of the glass trowel, the line or fold pattern is obtained. Application tools should be cleaned with water after application. For new coated surfaces, at least 28 days must be waited for the application of paint to the surface. The paint should be mixed until it is completely homogenous before use. The Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

Warning:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

Storage: In a cool, clean and dry environment, the product can be stored for a minimum of 1 year without opening the door of the cabinet, without exposure to direct sunlight.

Package:10 kg, 3 kg, 1 kg PE bucket.

final coat interior coating

Product Description: Pure Acrylic Emulsion Based, nacre additives, decorative interior wall paint

grained structure with pearl effect.

Features:

Thanks to its nacre structure, bright as pearl and matt, Palace offers a special image of texture, allowing for different pattern applications. Due to it being water-based sandy and having a metallic appearance, it gives the possibility to reflect your wall with coolness and splendor.
 
Application surfaces:

All pre-painted surfaces can be applied to interior surfaces such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.

 Technical Data:

Density: 1,31 ± 0,02 (g / ml)

Consumption: 3-4 (m² / lt), 250-350 (g / m2)

Solid Matter: 60% ± 2

Thinning ratio: Ready to use.

Drying Time: Touch 15 – 20 min; Dust retention 1 hour; Full drying 24 hours

Application:

The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty. If the surface to be applied is flattened with gypsum plaster, Silkcoat Izolac should be used on the surface before Silkomatt application, Silkcoat Universal Primer on old painted, dirty or synthetic painted surfaces; Silkcoat Putty Primer should be used on surfaces with putty application. Silkomatt is applied as a single layer in the final coat as the same color with Palace. Silkcoat Palace is applied, according to the desired pattern, with the help of a brush by taking a little amount of product with the brush’s edge. When the product is about to dry, the liquid on the sand is removed with a clean, thick brush by slightly pressure. Thus, while the sand is taking its matte appearence, the subfloor will be gaining a glossy image. Tools should be cleaned immediately after application. The paint should be mixed until it is completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

Warning:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

Storage:

In a cool, clean and dry environment, the product can be stored for a minimum of 1 year without opening the door of the cabinet, without exposure to direct sunlight.

Package:

10 kg, 3 kg PE bucket.

interior wall paint

Product Description: The Velvetto Soft Silkcoat Efects Group is a series of psoriasis-added, velvet-patterned, shiny appearance, pure acrylic-based, creating fun and moving spaces.

Features: Velvetto Soft, which allows different pattern applications, offers a nacre semi-gloss and matt-like pearl special appearence. Due to its water-based structure, it does not harm human health or the environment.

Application surfaces: All pre-painted surfaces can be applied to interior surfaces such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.

Technical Data:

Density: 1,13 ± 0,02 (g / ml)

Consumption: 3,5-4 (m² / lt), 250-350 (g / m2)

Thinning ratio: Ready to use.

Drying Time: Touch 30-45 min; Dust repulsive 1 hour; Full drying 24 hours

Application: The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty. If the surface to be applied is flattened with gypsum plaster, Silkcoat Izolac should be used on the surface before Silkomatt application, Silkcoat Universal Primer on old painted, dirty or synthetic painted surfaces, Silkcoat Putty Primer should be used on surfaces with putty application. Silkomatt is applied as a single layer on the last layer of the same color of Velvetto Soft. Velvetto is applied to the surface with the help of roller. The pattern is given to the product by circular movements with the help of a special trowel, without complete drying on the surface. The surface is left to dry for 4-6 hours depending on weather conditions. After the first layer application is applied, the second layer is applied with the help of a Velvetto decorative trowel or roller to form a thin layer on the surface. After application, the surface is patterned with circular motions with the help of special trowel. Tools should be cleaned immediately after application. The paint should be mixed until it becomes completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

Warning:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

Storage: In a cool, clean and dry environment, the product can be stored for a minimum of 1 year without opening the door of the cabinet, without exposure to direct sunlight.

Package: 10 kg, 3 kg plastic bucket.

Product Description: Pure Acrylic Emulsion binder based, psoriasis additives, nacre elegance decorative interior wall paint.

Features: Thanks to its nacre structure, Metalico Soft offers a bright and special look like pearl, allowing for different pattern applications. In addition to having a high covering ability, it also can be wiped. Due to its water-based structure, it does not harm human health or the environment.

Scope of application:

All pre-painted surfaces can be applied to interior surfaces such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.

Technical Data:

Structure: Pure Acrylic

Density: 1,12 ± 0,02 (g / ml)

Consumption: 10-16 (m² / lt), 180-250 (g / m2)

Thinning ratio: Ready to use.

Drying Time: Touch 15 – 20 min; Dust repulsive 1 hour; Full drying 24 hours

Application:

The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty. If the surface to be applied is flattened with gypsum plaster, Silkcoat Izolac should be used on the surface before Metalico Soft application, Silkcoat Universal Primer should be used on old painted, dirty or synthetic painted surfaces and Silkcoat Paste Primer should be used on surfaces with putty application. In the last layer of the Metalico Soft color, Silkomatt is applied in one coat. After the primer is dry, Metalico Soft is diluted with 5% and applied with the help of roller or brush. After the first layer is dry, the second layer is applied with the help of a roller or brush. Patterns are given with special effect tools (bumper, brush, spatula, chamois) before the full drying takes place. Tools should be cleaned immediately after application. The paint should be mixed until it becomes completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

 Warning:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

Storage:

In a cool, clean and dry environment, the product can be stored for a minimum of 1 year without opening the door of the cabinet, without exposure to direct sunlight.

Package:

10 kg, 3 kg PE bucket.

Product Description: Powder polymer based, healthy and decorative interior wall covering material.

Features:                         

Prestige Series Silk Plaster, which contributes to heat and sound insulation, is anti static, does not hold dust. Besides its easy application, it does not harm human health and environment due to its water-based structure. It is odorless, it can be inhaled.

Scope of application:

Silkcoat silk plaster can be applied to thin plaster, gypsum plaster, gypsum board, wooden surfaces and non-alkaline surfaces. It is not applied to glass, brick, metal surfaces, exterior facades and wet surfaces.

Technical Data:

Structure: Powder polymer

Consumption: 220-300 (g / m²)

Thinning ratio: Ready to use

Drying Time: 24 hours

Application Thickness: 1 mm

 

Application:

The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. For new plastered surfaces, firstly Silkcoat Primer should be applied. Old painted, dirty, damp surfaces, paint dirt, soot and other residues on the surface should be thoroughly cleaned. Silkcoat Primer is applied after the application of SX 2000. After the primer application is dry, the application of silk plaster can be started. The material in the bag is kneaded thoroughly by pouring into approximately 6 liters of water. Depending on climate and application conditions, some more water can be added if necessary. After the prepared material has waited for at least 20 minutes, it is applied to the surface with a plastic trowel by a plaster technique so that it obtains an average thickness of 1 mm. Tools should be cleaned immediately after application. When applied to places where the deformation is excessive; It is advisable to add a glass of water for each pouch of Silkcoat SX 2000 to the material before it is kneaded. The surface should not be left halfway during application. Application can be done with plastic trowel and spray gun. . For new coated surfaces, at least 28 days must be waited for the application of paint to the surface. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying.

Warning:

Store the product in a tightly closed container.

Do not pour into the sewer.

Storage:

In a cool, clean and dry environment, the product can be stored for a minimum of 1 year without opening the door of the cabinet, without exposure to direct sunlight.

Package: Bag.

Silk Plaster Coating

Product Description: It is an air-drying matte paint modified with special resin anti-corrosive additives.

Features: Silkcoat Metal Roof Paint, which is a one-component, resistant to chemical factors and UV, has a long usage feature by reflecting the light as it contains special additives. Due to its high mechanical resistance, it creates a long-term permanent film on the surfaces. It has high flexibility and excellent wear resistance.

Scope of Application: All kinds of steel, zinc, aluminum, PVC, galvanized, chrome, black metal etc. used on surfaces.

Technical Data:

Binder Type: Special Resin

Density :(g/ml) (20 °C)  1.50 ± 0.05

Solids (Wt%) : 70 ± 1

Solids (Volume %): 52 ± 1

Gloss: Matte

Water / Solvent Resistance: Very good

Coating Capacity (Theoretical): 10 m² / lt (30μ dry film thickness)

Flexibility: Good

Recommended Number of Layer: 1 layer

Drying Time (23°C, 80%)

Relative Humidity: Initial Drying: 1/2 hour

Drying: 1 hour

Second coat application: 1 hour

Full Hardening: 48 hours

Application: The surface to be applied must be free of all kinds of dust, dirt and oil. Depending on the application method and air temperature; It is applied as a single layer with roller, brush or special airbrush machines. If a second coat application is required, wait at least 1 hour between coats.

Warnings:

R10 Flammable.

R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

R65 Harmful: may cause lung damage if swallowed.

R66 Repeated exposure may cause skin dryness or cracking.

R67 Vapors may cause drowsiness and dizziness.

S2 Keep out of reach of children.

S16 Keep away from sources of ignition.– No smoking.

S24/25 Avoid contact with eyes and skin.

S37 Wear suitable gloves.

S51 Use only in well-ventilated areas.

S57 Use suitable container to avoid environmental contamination.

S60 Dispose of this material and its container as hazardous waste.

S61 Avoid release to the environment. Consult the specific instructions for use/Safety data sheet.

S62 Do not induce vomiting if swallowed. Immediately seek first aid service, show container or label.

Storage:  It can be stored for one year in its unopened original packaging, in an environment of 5-35°C, out of direct sunlight. It should be protected from extreme temperature and humidity.

Packaging: 3 kg

Metal Roof Paint

Product Description: Urethane Alkyd resin based, transparent wood protector effective against mold and mushroom.

Features:

Wood Protector is a combination of both varnish and protector, thanks to its transparent structure, it colors without detracting from the natural appearence of the wood. Thanks to its antibacterial extracts, it prevents the formation of bacteria, fungi, molds and bedbugs on the wood. Protect the wood against UV rays. It is resistant to scratching and abrasion as well as the easy penetration to the surface.

Application surfaces:

Can be applied to all interior and exterior wooden surfaces.

Technical Data:

Structure: Urethane Alkyd resin based, transparent.

Consumption: 10-14 (m² / lt), 85-135 (g / m2)

Density: 0.92 ± 0.02 (g / ml)

Thinning ratio: 10-15%

Application tools: Brush, Roller, Pistole.

Drying: Dry in 6 – 12 hours depending on the type of wood.

Viscosity: 75 KU ± 10 (25 º C)

Density: (0,92 ± 0,02) g / cm³

Application:

All wood surfaces must be thoroughly smoothed to prepare a dry and clean surface with old paint and varnish free from oil, dirt and dust. Budaks should be burned and thoroughly cleaned with Cellulosic Thinner. Wood Protector is applied in 2 coats with 24 hours interval by brush, roller or spray method after thinning with 5% of thinner.

Warning:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

Flash point 36 ºC

Flammable, harmful when swallowed and breathed (inhaled).

Storage:

Storage life is at least 1 year in room conditions.

Package:

15 lt, 2,5 lt, 0.75 lt tin bucket.

Wood Protector Paint

Water Based Panel Door Paint / Pure acrylic binder based, semi matt, water based, first class, top coat satin panel door paint.

Properties: Harmless to human health and environment. High chemical resistance. High hiding power. Cleanable. Satin and semi matt looking, colors preserve vividness for long years.

Application Areas: After surface preparation, it can be applied on all interior surfaces such as panel door surfaces, old painted surfaces, concrete, gypsum, plaster, precast panel, glass textile and wallpaper.

Technical Information: Content: Pure acrylic.

Consumption: Single coat: 13-18 (m/lt).

Thinner: Water.
Thinning ratio: %10-15. Drying: Touch dry 15 – 20 min;Hard dry 24 hours.

Surface Preparation: – The surface must be cleared of any oil, dirt or dust. Swollen and old paintings must be scraped off. Surface must be clean, dry and solid. -Hollows and cracks should be filled with Silkcoat Interior Acrylic Putty in case of necessity. -On the surfaces which are absorbent or were not painted before should be obtained by applying Silkcoat Izolac. Old and synthetic painted or dirty surfaces should be obtained by applying Silkcoat Universal Primer, on the surfaces which has been puttied should be obtained by applying Silkcoat Putty Primer.

Application: -It should be thinned with clean water and applied with roller, brush or spraying in two coats. -Leave minimum 2 hours between coats depending on weather conditions.

Application Details: -On newly painted surfaces, make sure that surface has waited about 28 days before application. -Do not apply below + 5ºC. -Gloss and glasslike surface s should be rubbed before application to obtain better adhesive and a healthy surface.

Caution: Avoid getting eye and skin contact. In case wash with plenty of water. Preserve in a tightly closed container. Keep out of the reach of children.

Storage: It can be stored unopened 1 year at room temperature.

Packaging: 15lt, 7,5lt, 2,5lt 1lt 0,75lt PE bucket.

Door Paint

DESCRIPTION: Alkyd resin based floor paint.

PROPERTIES AND TYPICAL USE: Formulated for applications; resistant to atmospheric conditions and friction. Forms an elastic hard film, excellently binds to the applied surfaces. Used as a ground marking paint on asphalt roads, exposed concrete, car parks, pavements, sport facilities, factories etc.

SURFACE PREPARATION: The surface of application must be clean and dry. The paint should be applied into a depth of 0.5-1 cm scrapped prior to application on the surface to form a level.

THINNING: 5ñ 10% for rollers, air and non-air spray guns, and application machines; use floor paint thinner.

TECHNICAL INFORMATION: Content: Alkyd Resin. Consumption: 0.900 kg/m2 (125-um dry film thickness) for single layer, depending on surface condition.

Thinner: Floor Paint Thinner.

Thinning Ratio: 10%

Drying: (20°C, 65% RH), Set-to-touch: 5 min.

Dust-dry: 30 min., Through dry: 1 hour.

STORAGE: Stored 1 year in its unopened container, away from sunlight, and at room temperature.

floor paint

DESCRIPTION:  Urathane alkyd based, resistant against UV rays, durable, glossy varnish.

CHARACTERISTIC :– Protects wooden surfaces against water , UV rays ,rain ,and atmospheric conditions. – High filling ability, glossy , durable against corrosion and outside effects .

APPLICATION SURFACES: Can be applied on all interior and exterior wooden parts of marine vehicles , furniture  and similar.

TECHNICAL INFORMATION:

Structure: Urethane alkyd

Class 1 Long Oil Varnish

Consumption: 10-14 (m² / lt), 85-135 (g / m2)

Thinning ratio: 10-15%

Application tools: Brush, Roller, Pistol.

Drying: Dust repulsive 2-4 hours; hard dry 7-8 hours; 72 hours to physical and chemical drying

Viscosity: 110 KU ± 10 (23 º C)

Density: 0.92 ± 0.02 (g / ml)

Amount of solid matter: (55 ± 2)%

Dry film thickness: 30 ± 5

Wet film thickness: 60 ± 5

APPLICATION: Yacht varnish should be cleaned from dirt and oil, old paints and varnishes should be smoothed to obtain a clean and dry surface. On new surfaces, knots should be burned and filled with Silkcoat Pinotene. Before the yacht varnish is applied, Silkcoat Pinotene is applied to obtain a colored surface and further increase the durability of the wood. The sharp edges of the welding tips, edges should be trimmed and a smooth surface should be obtained. Yacht varnish can be applied by roller or brush. There is no need to thin it. When the application is made by spray, the product is thinned with 10-15% of synthetic thinner.

CAUTION:

R10 Flammable.

R51 / 53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

R65 Harmful: may cause lung damage if swallowed.

R66 Repeated exposure may cause skin dryness or cracking.

R67 Vapors may cause drowsiness and dizziness.

S2 Keep out of reach of children.

S16 Keep away from sources of ignition – No smoking.

S24 / 25 Avoid contact with eyes and skin.

S37 Wear suitable gloves.

S51 Use only in well-ventilated areas.

S57 Use a suitable container to avoid contamination.

S60 Dispose of this material and its container as hazardous waste.

S61 Avoid release to the environment. Refer to Special Instructions for Use / Safety Data Sheet.

S62 If swallowed, do not induce vomiting. Contact the first aid service immediately and show the container or label.

STORAGE:  Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING: 15 lt, 2,5 lt, 0.75  lt tin Bucket.

Yatch Varnish

Product Description: The Velvetto Silkcoat Efects Group is a series of nacre-additives, velvet-patterned, glossy appearance, pure acrylic based, creating fun and moving spaces.

Features:

Thanks to its nacre structure, Velvetto offers a semi-gloss and matte velvety special image like pearls, allowing for different pattern applications. Due to its water-based structure, it does not harm human health and environment.

Scope of application:

All pre-painted surfaces can be applied to interior surfaces such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.

Technical Data:

Density: 1,16 ± 0,02 (g / ml)

Consumption: 3,5-4 (m² / lt), 250-350 (g / m2)

Thinning ratio: Ready to use.

Drying Time: Touch 30-45 min; Dust repulsive 1 hour; Full drying 24 hours

Surface Preparation:

The application surface should be free from all kinds of dust, dirt and oil, old swollen paints should be thoroughly scraped, a clean dry and solid surface should be obtained.If the surface is not smooth, for Silkomatt application, Silkcoat Internal Acrylic Putty should be applied in order to smoothen the surface.

If the surface to be applied is flattened with gypsum plaster, Silkcoat Izolac should be used on the surface before Silkomat application, Silkcoat Universal Primer should be used on smooth, old painted surfaces, dirty or synthetic painted surfaces, and Silkcoat Putty Primer should be used on surfaces with Putty application.Silkomat of the same color is applied as a single layer with the primer.

Application:

The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly sanding the blistered and old painted surfaces. If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty. If the surface to be applied is flattened with gypsum plaster, Silkcoat Izolac should be used on the surface before Silkomatt application, Silkcoat Universal Primer on old painted, dirty or synthetic painted surfaces, Silkcoat Putty Primer should be used on surfaces with putty application. Silkomatt is applied as a single layer in the last layer of Velvetto. Velvetto is applied to the surface with the help of roller. The pattern is given to the product by circular movements with the help of special goods, without complete drying on the surface.

The surface is left to dry for 4-6 hours depending on weather conditions. After the first layer application is applied, the second layer is applied with the help of Velvetto decorative trowel or roller to form a thin layer on the surface. After application, the surface is patterned with circular motions with the help of a special trowel. Tools should be cleaned immediately after application. The paint should be mixed until it becomes completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

Warning:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container. Do not pour into the sewer.

Storage: In a cool, clean and dry environment, the product can be stored for a minimum of 1 year without opening the door of the cabinet, without exposure to direct sunlight.

Package: 10 kg, 3 kg PE bucket.

Decorative Paint

DESCRIPTION: Pure Acrylic binder based, psoriasis additive, pearl elegance decorative interior wall paint.

CHARACTERISTIC:Thanks to its pearl-like structure, Metalico offers a bright and special look like pearls, allowing for different pattern applications. It has a high degree of scraping ability. The water-based structure does not harm human health or the environment.

APPLICATION SURFACES:Can be applied on a wide range of  interior old painted surfaces such as such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.

TECHNICAL INFORMATION

Structure: Pure Acrylic

Density: 1,04 ± 0,02 (gr / ml)

Consumption: 6 -8 m² / kg (Wood pattern and similar), 20- 30 m2/kg (Leopard pattern and similar), 125-170 (g/m2).

Thinner: Water

Thinning Ratio: %10 max.(with clean water)

Drying: Touch dry: after 15-20 minutes,Dust repulsive: after 1 hour, Hard dry: after 24 hours

APPLICATION: The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. If the surface is not flat, a smooth surface should be obtained with Silkcoat Dahili Acrylic Paste for Metalico application. If the surface to be applied is flattened with gypsum plaster, Silkcoat Izolac should be used on the surface before Metalico application, Silkcoat Universal Primer should be used on smooth old painted surfaces, dirty or synthetic painted surfaces, and Silkcoat Putty Primer should be used on surfaces with putty application. After the primer application is dry, the floor is applied as two layers of Metalico. Wait at least 2 hours between coats. The Silkcoat Metalico is thinned with water according to the desired pattern and applied uniformly with the aid of a roller or brush.

Metalico is applied up to 10 – 20 m2 and is then given a special effect with hand tools (bumper, brush, spatula, chamois etc). In the same way, the other surfaces finish gradually. The spatula can work on top of different colors. Tools should be cleaned immediately after application. Metalico should be mixed until completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

CAUTION: -Avoid getting eye and skin contact. In case wash  with plenty of water. -Preserve in a tightly closed container. -Keep above  the reach of children -Do not dump into sewer system.

STORAGE:  Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING: 10 kg, 3kg PE Bucket.

DESCRIPTION: Acrylic copolymer binder-based, silk-matt outward looks, water based, first class, satin interior final coat paint.

CHARACTERISTIC:

Healthy and environmental friendly

High covering ability

Easy cleanable.

Satin and silk-matt appearance, colourfast for years.

APPLICATION SURFACES: After surface preparation, Natural Soft can be applied on a wide range of interior surfaces such as old painted surfaces, concrete, plaster, rendering, cement board, paintable wallpaper, glass textile etc.

TECHNICAL INFORMATION:

Content: Styrene Acrylic

Consumption: Single coat: 13- 18  (m²/ lt), 80-115 (gr/m²)

Thinner: Water

Thinning Ratio: %10-15

Drying: Touch Dry: after 15-20 min, Dust repulsive: after 1 hour, Hard dry: after 24 hours

Viscosity: 125 KU ± 10   (  23 º C )

pH: 8 – 9 (25 º C)

Density: 1,55 ± 0,02 (gr / ml)

Solids Content: %65±2

Wet Rubbing Power: Class 1

Covering Power: Class 2 ( 8 m²/tl )

Grain Size: Class S1

Brilliance: Class G2

Thickness of dry coat: ( 30 ± 5 ) micron

Thickness of wet coat: ( 60 ± 5 ) micron

SURFACE PREPARATION:– The surface must be cleared of any oil, dirt or dust. Swollen and old paintings must be scraped off. The surface must be clean, dry and solid. -Hollows and cracks should be filled with Silkcoat Dâhili Akrilik Macun in case of necessity.  -On the surfaces which are absorbent or were not painted before should be obtained by applying Silkcoat Izolac. Old and synthetic painted or dirty surfaces should be obtained by applying Silkcoat Universal Astar, On the surfaces which has been puttied should be obtained by applying Silkcoat Macun Astari(Putty Primer).                

APPLICATION:-The paint should be thinned 10-15% with clean water and applied with roller, brush or spraying in two coats. -Leave 2 hours between coats depending on weather conditions. -After application tools should be cleaned with water.

APPLICATION DETAILS: -On new painted surfaces, make Sure that Surface has waited about 28 days before application. -The paint should be completely mixed so that it is homogenous. -Ambient and surface temperature should be between +5 and +35 degrees during the application and product drying season. -Gloss and glasslike Surfaces should be rubbed before application to obtain better adhesive and a healthy Surface.

CAUTION: S2: Keep out of the reach of children. S24/25: Avoid getting eye and skin contact. In case wash with plenty of water. S46: If swallowed, seek medical advice immediately and show this container or label

Preserve in a tightly closed container. Do not dump into the sewer system.

STORAGE: Keep at a cool and clean place away from sun light. It can be stored unopened 1 year at room temperature.

PACKAGING:15 lt, 7,5 lt, 2,5 lt PE Bucket

QUALITY CERTIFICATE:Found complying as per TSE 5808 Conditions.

interior final coat paint

DESCRIPTION: Acrylic copolymer binder-based, silicone additives, silk-matt outward looking, water-based, first class, interior final coat paint.

CHARACTERISTIC:

Healthy and environmental friendly.
Leaves no cracks. Easily appliable.
High covering ability.
Breathable
Easy cleanable through silicone technology
Silk-matt outward look, colourfast for years.

APPLICATION SURFACES:After surface preparation, Silkosil can be applied on a wide range of interior surfaces such as old painted surfaces, concrete, plaster, rendering, cement board, wallpaper, glass textile etc.

TECHNICAL INFORMATION:

Content: Styrene Acrylic

Consumption: Single coat: 13- 18  (m²/ lt), 75-110 (gr/m²)

Thinner: Water

Thinning Ratio: %10-15

Drying: Touch Dry: after 15-20 min, Dust repulsive: after 1 hour, Hard dry: after 24 hours

Viscosity: 125 KU ± 10   (  23 º C )

pH: 8 – 9 (25 º C)

Density: 1,21 ± 0,02 (gr / ml)

Solids Content: %50±2

Wet Rubbing Power: Class 1

Covering Power: Class 2 ( 8 m²/tl )

Grain Size: Class S1

Brilliance: Class G2

Thickness of dry coat: ( 30 ± 5 ) micron

Thickness of wet coat: ( 60 ± 5 ) micron

Resistant to mold growth: K1

SURFACE PREPARATION: – The surface must be cleared of any oil, dirt or dust. Swollen and old paintings must be scraped off. The surface must be clean, dry and solid. -Hollows and cracks should be filled with Silkcoat Dâhili Akrilik Macun in case of necessity. -On the surfaces which are absorbent or were not painted before should be obtained by applying Silkcoat Izolac. Old and synthetic painted or dirty surfaces should be obtained by applying Silkcoat Universal Astar, On the surfaces which has been puttied should be obtained by applying Silkcoat Macun Astari(Putty Primer).                                               

APPLICATION:-The paint should be thinned 10-15% with clean water and applied with roller, brush or spraying in two coats. -Leave 2 hours between coats depending on weather conditions. -After application tools should be cleaned with water.

APPLICATION DETAILS: -On new painted surfaces, make Sure that Surface has waited about 28 days before application. -Paint should be completely mixed so that it is homogenous. -Ambient and surface temperature should be between +5 and +35 degrees during the application and product drying season. -Gloss and glasslike Surfaces should be rubbed before application to obtain better adhesive and a healthy Surface.

CAUTION: – S2: Keep out of the reach of children. – S24/25: Avoid getting eye and skin contact. In case wash with plenty of water. – S46: If swallowed, seek medical advice immediately and show this container or label – Preserve in a tightly closed container. – Do not dump into the sewer system.

STORAGE: Keep at a cool and clean place away from sun light. It can be stored unopened 1 year at room temperature.

PACKAGING: 15 lt, 7,5 lt, 2,5 lt PE Bucket

QUALITY CERTIFICATE: Found complying as per TSE 5808 Conditions.

DESCRIPTION: Acrylic copolymer binder-based, water based, matt outward looks, silicone additives, first class, interior final coat paint.

CHARACTERISTIC:  -Healthy and environmental friendly -Prevents the formation of mold through its antibacterial coat. -Breathable  -Easily appliable and leaves no remains. -High covering ability. -Easy cleanable through silicone  -Silk-matt outward look, colourfast for years.

APPLICATION:After surface preparation, Silkomatt can be applied on a wide range of interior surfaces such as old painted surfaces, concrete, plaster, rendering, cement board, wallpaper, glass textile etc.

TECHNICAL INFORMATION:

Content: Styrene Acrylic

Consumption: Single coat: 13- 18  (m²/ lt), 85-130 (gr/m²)

Thinner: Water

Thinning Ratio: %10-15

Drying: Touch Dry: after 15-20 min, Dust repulsive: after 1 hour, Hard dry: after 24 hours

Viscosity: 125 KU ± 10   (  23 º C )

pH: 8 – 9 (25 º C)

Density: 1,56 ± 0,02 (gr / ml)

Solids Content: %67±2

Wet Rubbing Power: Class 2

Covering Power: Class 2 ( 8 m²/tl )

Grain Size: Class S1

Brilliance: Class G2

Thickness of dry coat: ( 30 ± 5 ) micron

Thickness of wet coat: ( 60 ± 5 ) micron

Resistant to mold growth: K1

SURFACE PREPARATION: – The surface must be cleared of any oil, dirt or dust. Swollen and old paintings must be scraped off. The surface must be clean, dry and solid. -Hollows and cracks should be filled with Silkcoat Dâhili Akrilik Macun in case of necessity.-On the surfaces which are absorbent or were not painted before should be obtained by applying Silkcoat Izolac. Old and synthetic painted or dirty surfaces should be obtained by applying Silkcoat Universal Astar, On the surfaces which has been puttied should be obtained by applying Silkcoat Macun Astari(Putty Primer).                                               

APPLICATION: -The paint should be thinned 10-15% with clean water and applied with roller, brush or spraying in two coats. -Leave 2 hours between coats depending on weather conditions.-After application tools should be cleaned with water.

APPLICATION DETAILS:-On new painted surfaces, make Sure that Surface has waited about 28 days before application. -Paint should be completely mixed so that it is homogenous. -Ambient and surface temperature should be between +5 and +35 degrees during the application and product drying season. -Gloss and glasslike Surfaces should be rubbed before application to obtain better adhesive and a healthy Surface.

CAUTION: – S2: Keep out of the reach of children. – S24/25: Avoid getting eye and skin contact. In case wash with plenty of water. – S46: If swallowed, seek medical advice immediately and show this container or label. – Preserve in a tightly closed container. – Do not dump into the sewer system.

STORAGE: Keep at a cool and clean place away from sun light. It can be stored unopened 1 year at room temperature.

PACKAGING: 15 lt, 7,5 lt, 2,5 lt PE Bucket

QUALITY CERTIFICATE: Found complying as per TSE 5808 Conditions.

DESCRIPTION: Acrylic copolymer binder-based, matt outward looks, water based, interior final coat paint.

CHARACTERISTIC: -Healthy and environmental friendly -High covering ability. -Breathable -Matt smooth outward looking, colourfast for years

APPLICATION SURFACES: After surface preparation, Class Plastic can be applied on a wide range of interior surfaces such as old painted surfaces, concrete, plaster, rendering, cement board, wallpaper, glass textile etc.

TECHNICAL INFORMATION:

Content: Styrene Acrylic

Consumption: Single coat: 13- 16  (m²/ lt), 90-130 (gr/m²)

Thinner: Water

Thinning Ratio: %10-15

Drying: Touch Dry: after 15-20 min, Dust repulsive: after 1 hour, Hard dry: after 24 hours

Viscosity: 125 KU ± 10   (  23 º C )

pH: 8 – 9 (25 º C)

Density: 1,56 ± 0,02 (gr / ml)

Solids Content: %67±2

Wet Rubbing Power: Class 2

Covering Power: Class 2 ( 8 m²/tl )

Grain Size: Class S1 thin

Brilliance: Class G3 matt

Thickness of dry coat: ( 30 ± 5 ) micron

Thickness of wet coat: ( 60 ± 5 ) micron

SURFACE PREPARATION:– The surface must be cleared of any oil, dirt or dust. Swollen and old paintings must be scraped off. The surface must be clean, dry and solid -Hollows and cracks should be filled with Silkcoat Dâhili Akrilik Macun in case of necessity. -On the surfaces which are absorbent or were not painted before should be obtained by applying Silkcoat Izolac. Old and synthetic painted or dirty surfaces should be obtained by applying Silkcoat Universal Astar, On the surfaces which has been puttied should be obtained by applying Silkcoat Macun Astari(Putty Primer).                                               

APPLICATION:-The paint should be thinned 10-15% with clean water and applied with roller, brush or spraying in two coats. -Leave 2 hours between coats depending on weather conditions. -After application tools should be cleaned with water.

APPLICATION DETAILS:-On new painted surfaces, make Sure that Surface has waited about 28 days before application. -Paint should be completely mixed so that it is homogenous. -Ambient and surface temperature should be between +5 and +35 degrees during the application and product drying season. -Gloss and glasslike Surfaces should be rubbed before application to obtain better adhesive and a healthy Surface.

CAUTION: – S2: Keep out of the reach of children. – S24/25: Avoid getting eye and skin contact. In case wash with plenty of water. – S46: If swallowed, seek medical advice immediately and show this container or label – Preserve in a tightly closed container. – Do not dump into the sewer system.

STORAGE:  Keep at a cool and clean place away from sun light. It can be stored unopened 1 year at room temperature.

PACKAGING: 15 lt, 7,5 lt, 2,5 lt PE Bucket

QUALITY CERTIFICATE: Found complying as per TSE 5808 Conditions.

DESCRIPTION: Pure Acrylic binder based, matt appearance, water based, first class, final coat exterior paint.

CHARACTERISTIC: Acrylic paint is resistant to UV rays thanks to pigments in its structure. In addition to having high closure power, the colors retain their vitality for many years. The water-based structure does not harm human health or the environment.

APPLICATION SURFACES: Can be applied on a wide range of interior old painted surfaces such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.

TECHNICAL INFORMATION:

Structure: Pure acrylic

Consumption: Single coat : 6-10  m²/ lt, 100-170 (g/m2).

Thinner: Water

Thinning Ratio: %10- 15

Density: 1,58 ± 0,02 gr / ml

Drying: Touch dry: after 15-20 minutes, Dust repulsive: after 1 hour, Hard dry: after 24 hours

Viscosity: 115 KU ± 10   (  23 º C )

pH: 8 – 9

APPLICATION: The application surface should be free from all kinds of dust, dirt and oil. Once the blistered and old painted surfaces have been lightly smoothed, the application of primer should be carried out to obtain a clean, dry and solid surface. If necessary, defects and cracks on the surface should be repaired with Silkcoat Dahili Acrylic Putty. Silkcoat Izolac on new painted and absorbent surfaces, Silkcoat Acrylic Primer on old painted, dirty or synthetic painted surfaces. Silkcoat Acrylic Paint is thinned with 10-15% clean water then applied in 2 layers by roller, brush or spraying method.

Wait at least 2 hours between coats depending on the air temperature. Tools should be cleaned immediately after application. For new coated surfaces, at least 28 days must be waited for the application of paint to the surface. The paint should be mixed until it is completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

CAUTION: -Avoid getting eye and skin contact. In case wash  with plenty of water. -Preserve in a tightly closed container. -Keep above  the reach of children -Do not dump into sewer system.

STORAGE:  Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING: 15 lt, 2,5 lt PE Bucket

Poz No: Y.25.004/01

DESCRIPTION:Pure acrylic binder based matt appearance elastic exterior paint.

CHARACTERISTIC: Elasticoat Paint, which has superior flexibility, does not crack due to its elastomer property. It is resistant to sun rays (UV), rain, snow and industrial effects. It is easy to apply and has excellent closure and adhesion properties.

APPLICATION SURFACES: The floor preparation can be applied to all clean and dry exterior surfaces.

TECHNICAL INFORMATION:

 

Structure: Pure acrylic

Consumption: Single coat: 6- 10  (m²/lt), 100-170 (g/m2)

Thinner: Water

Thinning Ratio: % 10 -15 water

Density: 1,58 ± 0,05 ( g / ml )

Drying: Touch dry: after 15-20 min, Dust repulsive: after 1 hour, Hard dry: after 24 hours

Viscosity: 120 KU ± 10   (  23 º C )

PH: 8 – 9

APPLICATION: The application surface should be free from all kinds of dust, rust, dirt, oil and old paint residues. After cleaving the surface cracks with Silkcoat External Putty and smoothing, apply Silkcoat Acrylic Primer to obtain a clean, dry and solid surface. Elasticoat Paint is applied in 2 layers by roller, brush or spray method by thinning with 20-30% of the first layer and 10-15% of the second layer with clean water.

Wait at least 2 hours between coats depending on the air temperature. Tools should be cleaned immediately after application. For new coated surfaces, at least 28 days must be waited for the application of paint to the surface. The paint should be mixed until it is completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.

CAUTION: Avoid getting eye and skin contact. In case wash  with plenty of water. Preserve in a tightly closed container. Keep above  the reach of children .Do not dump into sewer system.

STORAGE:  Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING: 15 lt, , 2,5 lt PE Bucket

Poz No: Y.25.004/04, Y.25.004/09

PRODUCT DESCRIPTION: It is a new generation water-based, pure acrylic-based transformation paint with excellent adhesion to all surfaces.

FEATURES: It has very high covering power. It has excellent water resistance, therefore it also provides waterproofing on the surface it is applied to.It has high chemical resistance (soap, cleaning detergent, diluted bleach, etc.). Since it spreads very well, it does not leave roller or brush marks, and allows the user the desired time for the necessary corrections.

Thanks to the shiny appearance it leaves after application, it does not require additional varnish application.It has high adhesion strength and does not require any primer. It is dirt and stain resistant and can be easily cleaned with a wet and soapy cloth.It does not have any disturbing odor. It is suitable for use indoors and outdoors.

APPLICATION AREAS: It can be applied to all kinds of surfaces such as wood, furniture, parquet, laminate, ceramic, porcelain, tile, marble, glass plastic, metal, aluminum, galvanized, zinc, stone, wall and paper.

TECHNICAL DATA:

DILUTION (by volume): Ready for use. Mix before application.

DRYING TIME (20°C): Dry to Touch; 1-2 hours, 24 hours to final drying. Applied surfaces should not be used for 1 day, and surfaces exposed to water should not be used for 2 days.
Water accumulation should not be allowed for the first 7 days and it should be protected against impacts.

PAINTABLE AREA: With 1 liter, an area of ​​10-20m² can be painted in two coats, depending on the application method and the ground.

APPLICATION: The surface to be applied must be clean. The surface must be free from all factors that will reduce the adhesion of the paint to the surface, such as dust, dirt, oil and silicone, and sanding should be done when necessary.It does not require the use of any primer before application. It is recommended to prime metal surfaces with Silkcoat Anti-Rust to prevent corrosion. After opening the VIABELLA package, it is mixed until a homogeneous consistency is obtained.

The product is applied to the pre-prepared surface in 2 layers without diluting, using a silk brush, velvet roller or spraying.At least 2 hours should be waited between coats. During application, care should be taken to keep the applied surface and ambient temperature between +5°C and +30°C.

WARNINGS: S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately; Show the container or label.Store the product in a tightly closed container. Do not pour it into the sewer.

STORAGE: 2 years in its original unopened package at room temperature.

transformation paint

DESCRIPTION: Acrylic copolymer binder based, modified by resins, excellent water insulation providing elastic isolation material.

CHARACTERISTIC :

Elastic, solid, flexible, rigid, mechanically puncture resistant, superior water impermeability when dry, developed for waterproofing.

APPLICATION SURFACES:

It can be used on surfaces such as basement, wall, terrace, roof and similar needed for water isolation.

TECHNICAL INFORMATION:

Structure: Liquid Plastic

Consumption: 1-1,3 (m2/lt), 700-1000 (g/m2)

Thinning Ratio: No Thinning, ready-to-use.

Application tools: Roller and brush.

Ph: 8 –  9

Density: 1,33 ± 0,02 ( g / ml )

Amount of solid: ( 66,5 ± 2 )%

Thickness of dry coat: ( 900 ± 100 ) Micron

Thickness of wet coat: ( 0,17 ± 0,2 ) cm

APPLICATION:

The application surface should be free from all kinds of dust, dirt and oil. Surface defects and cracks are repaired with the suitable paste and smoothed to obtain a clean, dry and solid surface. Subend is diluted with 40% ratio of water and is applied as primer. After the first coat is dry, the second coat is applied without thinning of the product. After the second coat is completely dry, the third coat is applied without thinning of the product. Ambient and surface temperature should be between + 5ºC and + 30ºC during application and product drying.

CAUTION:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

STORAGE:

Keep  at a cool and clean place away from sun light. It can be stored  unopened 1 year  at room temperature.

PACKAGING:

20 kg – 10 kg – 3,5 kg PE bucket.

Exterior Wall Cladding

elastic isolation material

Decorating spray for a marble look is available in different colours. It is suitable for indoor and outdoor applications. It is used for individual effects on a wide variety of underground surfaces such as wood, metal, glass, ceramics, porcelain, paper, cardboard, stone, plastic – also polystyrene. Silkcoat Marble Stone Effect Spray does not cover the entire surface, the effect achieved depends mainly on the color of the surface.

Drying time: after 15 minutes.

Usage: The surface must be clean, dry and free of oil. Cover parts outside the application area. Shake for 2-3 minutes before use. Spray to test on another area first. Spray from a distance of approximately 30 cm. The result depends on the creativity of the user and the desired effect. We recommend spraying in short presses.

Danger: Highly flammable aerosol. Pressurized container: May explode when heated. Causes serious eye irritation. If medical advice is needed, keep the container or label handy. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and all other ignition sources. DO NOT SMOKE

while using. Do not spray on open fire or any other ignition source. Do not pierce or burn, even after use. Do not breathe aerosols. Protect from solar radiation. Do not expose to temperatures above 50°C. Dispose of contents/container in accordance with regional regulations. Without adequate ventilation, explosive mixtures may form. It has a long-lasting and toxic effect on aquatic life.

decorating spray

Fundamentals of Colakoglu Construction was built by Mr. Izzet Colakoglu in 1961 in Istanbul. 
Silkcoat Paint has founded in 1993 and started its production with Silk Plaster (liquid wall paper).
Then adding manufacturing of mineral plaster, construction paints, decorative(efect) paint, decorative coatings, varnishes, and Silkoterm Thermal Insulation System. 
Silkcoat currently export its product to more than 70 countries. 
Silkcoat continues to produce quality products to the world paint market with its production facilities in 13 countries. 
As a Colakoglu Concrete, has found its ready-mix concrete facility in Istanbul, July 2007 with 400,000m3/year capacity. 
Our partnership Anadolu Mikronize biggest calcium carbonate factory in Turkey has started production in 2008 in Nigde with its 300,000 mt/year.
Now Silkcoat has making progress with trust and praise getting from its customer.

Silkcoat Duvar Kaplamalari Ltd. Şti̇. / About :

Acrylic Putty - ( Made In Turkey / Turkish Products )

Sectors

Silkcoat Duvar Kaplamalari Ltd. Şti̇. Export Products

Silkcoat Duvar Kaplamalari Ltd. Şti̇. - Acrylic Putty Export Products

Silkcoat Duvar Kaplamalari Ltd. Şti̇. / Products